 | You won't need to get permits from your local or state
government. Some areas require them for plasma cutting systems.
|
|
|
No poisonous fumes.
Does not need a ventilation system.
|
|
No Fire Hazard. You won't have to fire-proof your shop.
You might be required to do so with a plasma cutting system.
|
|
Your fitting patterns won't be discolored, tempered or
rough. This means your edge forming equipment will last much longer.
|
|
No "cookie cutter" or "skeleton" scrap
to cut up and throw away.
|
|
Patterns are automatically aligned. "Tic" marks
are placed so that most of the cutting can be done on a shear.
|
|
Roll, kink, brake and other assembly marks are drawn on
patterns along with fitting and pattern ID's.
|
|
Lines are always on the inside of the fittings.
|
|
Takes up less floor space.
|
|
Uses 120 VAC. No special wiring, gas or compressed air
needed.
|
